Factory Reconditioned Skil 3320-01-RT 10-in Drill Press with Laser
-
Factory Reconditioned
for $137.98
You May Also Like These...
- Laser X2 2-Beam Laser for precise hole alignment
- Depth Adjustment System for easy depth control
- Variable Speed Gearing-5 speed system for different material types
- 1/2-in Keyed Chuck to accept large diameter bits designed for woodworking and cutting
- Adjustable Depth Stop for accurate measurements and repetitive drilling
- 0 - 45 degree tilting work surface for precise and accurate drilling
- 0 - 45 degree tilting square work surface for precise and accurate drilling
- Bump-off Switch for added safety
- 10-in Drill Press with Laser - 3320-01-RT
- Cast Iron Base and Work Table
- Chuck Key
| Amperage: | 3.2 |
| Chuck Size: | 1/2-in |
| RPM: | 570 - 3,050 |
| Voltage: | 120V |
Robert Bosch Tool Corporation ("Seller") warrants to the original purchaser only, that all Skil portable and benchtop power tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or misrepaired by persons other than Seller or Authorized Service Station. To make a claim under this Limited Warranty, you must return the complete portable or benchtop power tool product, transportation prepaid, to any Skil Factory Service Center or Authorized Service Station. For Authorized Skil Power Tool Service Stations, please refer to your phone directory.
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY ITEMS SUCH AS CIRCULAR SAW BLADES, DRILL BITS, ROUTER BITS, JIGSAW BLADES, SANDING BELTS, GRINDING WHEELS AND OTHER RELATED ITEMS.
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. SOME STATES IN THE U.S., SOME CANADIAN PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.
THIS LIMITED WARRANTY APPLIES ONLY TO PORTABLE AND BENCHTOP ELECTRIC TOOLS SOLD WITHIN THE UNITED STATES OF AMERICA , CANADA AND THE COMMONWEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE WITHIN OTHER COUNTRIES, CONTACT YOUR LOCAL SKIL DEALER OR IMPORTER.
Note: This warranty applies to all Skil reconditioned products.
Product Reviews
REVIEW SNAPSHOT®
by PowerReviewsPros
- Easy to use (34)
- Good power output (22)
- Good safety features (11)
- No bit slippage (11)
- Easy to store (10)
Cons
- Heavy (3)
Best Uses
- In the workshop (21)
- Home repair (10)
- All around (9)
- Frequent use (6)
- Reviewer Profile:
- Avid do-it-yourselfer (18), Casual do-it-yourselfer (15), Professional (7)
Reviewed by 40 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Compact
- Easy To Use
- Ergonomic Design
- Great Precision
- No Bit Slippage
- Powerful
Cons
- Table Clamp Needs Work
Best Uses
- All Around
- Frequent Use
Comments about 10-in Drill Press with Laser:
I was looking for a Bench Drill Press for my R/C Modelling Hobby. I'm a retired manufacturing engineer so I'm pretty "fussy" about what I'm willing to purchase. I decided to give this "re-furbed" unit a try based upon the price and BOY oh BOY was I SURPRISED. The accuracy and precision of this unit is truly amazing! Using a Dial Test Indicator, I checked the T.I.R. (Total Indicator Run-out) of the Jacobs 33T spindle and discovered it only varied by "0.0005" inches Off-Center. CNC machines costing hundreds of thousands of dollars aren't much more precise than this. So, to say I'm pleasantly surprise is a HUGE understatement!!! The rest of the machine is very nice as well. The only problem I've had, and this is a minor one, in my opinion, is the hand crack clamp for the drill table. I wound up having to put a washer between the hank crank screw and the table crank housing in order to make the handle system more affective and efficient. Other than that rather minor issue, I can't say enough about this "re-furbed" Drill Press.
Very Nice Job, Skil ! Way To Go ! ! !
Pros
- Easy to assemble
- Good power
- Quality above expectation
Cons
Best Uses
Comments about 10-in Drill Press with Laser:
Seems to be pretty accurate though the screw is a bit agricultural
Pros
- Easy To Use
- Powerful
Cons
Best Uses
- All Around
- Frequent Use
- Heavy Duty
Comments about 10-in Drill Press with Laser:
i bought a reconditioned press,looks brandnew and performs the same
some people may not care for the belt driven system to change speed, but it only takes 2 minutes or less to change,not a big deal to me
i like the tilting table for angled work
when i recieved mine in the box, i had to put it together,don't freak out,very easy to assemble and very good instructions
for the price i paid for this, and the abbility in its performance, iwould recomend for pro or diy
Pros
- Easy To Use
- No Bit Slippage
- Powerful
Cons
- None
Best Uses
- Gifts
- Mortising
Comments about 10-in Drill Press with Laser:
Installed in a small garage woodworking shop - great feature list, easy to install, and not too heavy.
Pros
- Easy To Use
- No Bit Slippage
- Powerful
Cons
Best Uses
- All Around
Comments about 10-in Drill Press with Laser:
Great for metal and wood use.
Pros
- Easy To Use
- Ergonomic Design
- No Bit Slippage
Cons
Best Uses
- All Around
- Frequent Use
Comments about 10-in Drill Press with Laser:
I have never gotten anything but great products from this site.
Pros
Cons
Best Uses
Comments about 10-in Drill Press with Laser:
Drill Press arrived in like-new condition and in a timely manner.
Pros
- Easy To Use
- No Bit Slippage
- Powerful
Cons
- Heavy
Best Uses
- All Around
- Heavy Duty
Comments about 10-in Drill Press with Laser:
Good all around and high quality drill press.
Pros
- Compact
- Easy To Use
Cons
Best Uses
Comments about 10-in Drill Press with Laser:
I've needed a drill press for a while. This one came with a good price. I've used it several times and am pleased with its performance. The only thing I don't particularly like is the looseness of the table when it's unlocked to be moved. It's not as smooth as I'd like it to be.
Pros
- Easy To Use
- No Bit Slippage
- Powerful
Cons
Best Uses
Comments about Skil 10-in Drill Press with Laser:
As a retired master electrician I've used some of the very best professional tools available. This press just makes me smile. It is extremely adequate, space saving, rugged, and I could go on. It's a great addition to my home shop.
Displaying reviews 1-10
Previous | Next »
- Reconditioned products may have minor cosmetic blemishes or scratches that do not affect item performance may be present.
- Reconditioned products may not come with all of the consumables the new version comes with (bits, sanding pads/papers, cases, etc.).
- Both come with a manufacturer warranty and are covered by CPO’s Money Back Guarantee;
New is 30 days, Reconditioned is 60 days.
 |
 |
|
| Condition: | New | Factory Reconditioned |
| Features: | Same | Same |
| Specs: | Same | Same |
| Includes: | 10-in Drill Press with Laser - 3320-02, Cast Iron Base and Work Table, (2) AA Batteries, Chuck Key |
10-in Drill Press with Laser - 3320-01-RT, Cast Iron Base and Work Table, Chuck Key |
| Availability: | Out of Stock | In Stock |
| Warranty: | 1 Year Skil | 1 Year Skil |
| Price: | $137.98 | $89.99 |
| You Save: | N/A | $47.99 (35%) |
